Vintage Traxxas

Show:
Wrist Pin/Pin Retainer Wrist Pin/Pin Retainer $4.50 TRA3226 Buy Now
Wrist Pin Retainer Wrist Pin Retainer $4.50 TRA3226 Buy Now
Wing Wire & Buttons Wing Wire & Buttons $3.00 TRA2714 Buy Now
Wing Mounting Hardware, 4x8MM CCS (Aluminum) (3)/4x7mm Flanged NL (3) Wing Mounting Hardware, 4x8MM CCS (Aluminum) (3)/4x7mm Flanged NL (3) $3.00 TRA5512 Buy Now
Wheelie Bar Frame Wheelie Bar Frame $7.00 TRA4977 Buy Now
Wheel Nuts, 5mm Nylon (4) Wheel Nuts, 5mm Nylon (4) $1.50 TRA2747 Buy Now
Wheel Nuts, 4 mm Nylon Wheel Nuts, 4 mm Nylon $2.00 TRA2447 Buy Now
Weist Pin/"G" Spring Retainer (1) Weist Pin/"G" Spring Retainer (1) $3.00 TRA4026 Buy Now
Washers, White Plastic (5x8x1.0mm) (6) Washers, White Plastic (5x8x1.0mm) (6) $2.50 TRA3685 Buy Now
Vent, Battery Compartment (Includes Latch) (One Pair fits L or R Side) Vent, Battery Compartment (Includes Latch) (One Pair fits L or R Side) $3.50 TRA5628 Buy Now
Turnbuckles, 46mm (2) Turnbuckles, 46mm (2) $2.00 TRA1936 Buy Now
Turnbuckles, 40mm (2) Turnbuckles, 40mm (2) $2.00 TRA2645 Buy Now
Turnbuckle Set (TRX-10 Bullet) Turnbuckle Set (TRX-10 Bullet) $5.00 TRA1641 Buy Now
Turnbuckle Set (Rad 2, Hawk 2) Turnbuckle Set (Rad 2, Hawk 2) $3.50 TRA1741 Buy Now
Tranny Bulkhead/Wing Tubes (2) Tranny Bulkhead/Wing Tubes (2) $6.00 TRA2692 Buy Now
Top Shaft w/16 Tooth Gear Installed Top Shaft w/16 Tooth Gear Installed $4.50 TRA4493 Buy Now
Top Shaft Top Shaft $3.50 TRA4393 Buy Now
Top Gear, Steel (21 Tooth) Fits TRX-1 & TRX-3 Top Gear, Steel (21 Tooth) Fits TRX-1 & TRX-3 $3.00 TRA2794 Buy Now
Top Gear, Nylon (21 Tooth) Top Gear, Nylon (21 Tooth) $3.00 TRA2795 Buy Now
Top Drive Gear, Machined Delrin Top Drive Gear, Machined Delrin $6.00 TRA3195X Buy Now

Result Pages:  1  2  3  4  5 ...  [Next >>]  Displaying 1 to 20 (of 284 products)
Categories
Remote Control-> (424)
  RPM (140)
  Vintage Traxxas (284)
Trains-> (6516)
1 x Ball Joint Stay, Bevel Gear Stay, Medal Stop (Cat)
1 x Backplate, Blue Anodized machined Aluminum (Requires Electric Bump Starter (Not for Use w/Nitro Stampede
2 x Head Guard for Traxxas 2.5 Motor Heads - Blue
1 x Screw Kit for Wide Front A-Arms, Required When Installing on XL-5 Versions for Use with 70662, 70664, 70665
1 x Adapter, Spur Gear
1 x Ball Bearings (7x17x5mm 1) TRX2.5 Bearing
1 x Antenna w/Mount (TRX-10 Bullet)
1 x Bearing, Crankshaft (Front)
1 x Back Plate, Machined Aluminum (for Racers Using Electric Starters)
1 x Front Bumper Mount for Traxxas Revo (all Versions) - Black
1 x Front Shock Tower for Traxxas Slash 4x4, Stampede 4x4, Telluride & 1/10th Scale Rally 4wd
1 x Rear Shock Tower for Traxxas Slash 4x4, Stampede 4x4, Telluride & 1/10th Scale Rally 4wd
1 x Heavy Duty Rear A-Arms - fits Traxxas Electric Slash 2wd - Black
1 x Heavy Duty Rear A-Arms - fits Traxxas Electric Slash 2wd - Blue
2 x Rear Bumper Mount for Traxxas Revo - Black
1 x Rear Left A-Arms for Traxxas Summit, Revo & E-Revo - Blue
1 x Motor Protector for Traxxas Bandit, E-Rustler, E-Stampede 2wd, Slash 2wd (Requires either a Stock or RPM Bumper Mount) - Black
1 x Long Body Mounts fits all Versions of TRX T/E-Maxx for use with RPM Shock Towers Only - Black
1 x Front or Rear A-Arms for Traxxas Slash 4x4, Stampede 4x4, Rustler 4x4 & 1/10th Scale Rally 4wd(Does not fit ST Versions) - Green
1 x Motor Protector for Traxxas Bandit, E-Rustler, E-Stampede 2wd, Slash 2wd (Requires either a Stock or RPM Bumper Mount) - Blue
1 x Long Body Mounts fits all Versions of TRX T/E-Maxx for use with RPM Shock Towers Only - Blue
1 x Rear A-Arms Heavy Duty - Black fits TRX Bandit
1 x Front Bumper Mount for Traxxas Summit - Black
1 x Baffle Cone, Exhaust
1 x Hybrid Gearbox & Housing for Traxxas 2wd Versions Including the Slash 2wd, Stampede 2wd, E-Rustler & Bandit - Green
1 x Rear Bearing Carriers for Nitro Slash, Slash 4x4, Stampede 4x4, Rally, Telluride, Nitro Rustler, Nitro Stampede & Nitro Sport - Black
1 x Hybrid Gearbox & Housing for Traxxas 2wd Versions Including the Slash 2wd, Stampede 2wd, E-Rustler & Bandit - Blue
2 x Heavy Duty Camber Links fits Traxxas Rustler & Stampede 2wd (Electric Versions Only) - Green
1 x Rear Step Bumper fits All Versions of Traxxas T/E-Maxx - Blue
1 x Front Shock Tower fits Traxxas E-Stampede 2wd, E-Rustler, Slash 2wd, Bandit & Nitro Stampede - Black
2 x Heavy Duty Camber Links fits Traxxas Rustler & Stampede 2wd (Electric Versions Only) - Red
1 x Bearing Spacers, Clutch Bell 5x8x1.75mm (1), 5x11x1.1mm (1)
1 x Aluminum Pivot Bushings (2)
1 x Rear Shock Tower for Traxxas Nitro Slash, Nitro Rustler, Nitro Stampede & Nitro Sport - Black
1 x Rear Bumper for Traxxas Slash 4x4 - Black
1 x Ball Differential Re-Build Kit
1 x Rear Bumper for Traxxas Slash 4x4 - Blue
1 x Front Shock Tower for Traxxas Nitro Slash, Nitro Rustler & Nitro Sport - Black
1 x Battery Eliminator Set w/Power Switch Cover (Cat)
1 x Antenna Mount w/Screws
1 x Rear Bumper or Wheelie Bar Mount fits Traxxas Slash 2wd, E-Rustler, E-Stampede 2wd & Bandit - Black
1 x Rear Bumper or Wheelie Bar Mount fits Traxxas Slash 2wd, E-Rustler, E-Stampede 2wd & Bandit - Blue
1 x Aluminum Plug Mount (El Starter)
1 x rear Skid Plate for Traxxas Slash 2wd (Must use RPM Rear Bumper Mount 80902 or 80905) - Black
1 x Front Right A-Arms for Traxxas Summit, Revo & E-Revo - Black
1 x Front Skid Plate for Traxxas Slash 2wd - Blue
1 x rear Skid Plate for Traxxas Slash 2wd (Must use RPM Rear Bumper Mount 80902 or 80905) - Blue
1 x Wide Front Bumper fits all 2wd Versions of Rustler, Stampede, Nitro Sport & Bandit - Blue
1 x Heavy Duty Camber Links fits Traxxas Rustler & Stampede 2wd (Electric Versions Only) - Black
1 x Front Right A-Arms for Traxxas Summit, Revo & E-Revo - Blue
1 x Head Guard for Traxxas 2.5 Motor Heads - Black
1 x Rear Bumper for Slash 2wd (Not Compatible w/Slash 4x4) - Black
1 x Rear Bumper for Slash 2wd (Not Compatible w/Slash 4x4) - Blue
1 x Adapter Nut, Clutch
1 x Adjusting Plate (1), 2x4mm Cap screws (3), 2mm Lock Washers (3)
1 x Sealed Gear Cover for Traxxas E-Rustler, Stampede 2wd, Bandit & Slash 2wd fits all Including XL-5 & VXL (Max Spur Gear 87 Tooth) - Black
1 x Front Upper & Lower A-Arm Set for Traxxas 1/16th Scale Slash 4x4, Rally, Fiesta, KBG, Mustang & KBRR - Red
1 x Sealed Gear Cover for Traxxas E-Rustler, Stampede 2wd, Bandit & Slash 2wd fits all Including XL-5 & VXL (Max Spur Gear 87 Tooth) - Green
1 x Sealed Gear Cover for Traxxas E-Rustler, Stampede 2wd, Bandit & Slash 2wd fits all Including XL-5 & VXL (Max Spur Gear 87 Tooth) - Blue
1 x Bearing, Needle Roller (6x10x8mm) (2)
1 x Sealed Gear Cover for Traxxas E-Rustler, Stampede 2wd, Bandit & Slash 2wd fits all Including XL-5 & VXL (Max Spur Gear 87 Tooth) - Red
1 x Adapter, Air Filter to Carburetor
1 x Rear Bearing Carriers for TRX E-Rustler, E-Stampede, Bandit & Slash 2wd - Black
$623.10
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
osCommerce